Skip to contents

This model estimates the selecitvity of different gears from experimental catches.

Usage

select_Millar(
  param,
  x0 = NULL,
  rtype = "norm.loc",
  rel.power = NULL,
  plot = TRUE
)

Source

https://www.stat.auckland.ac.nz/~millar/selectware/

Arguments

param

A list with following parameters: vector with midlengths of size classes (midLengths), vector with meshSizes in increasing order (meshSizes), and a matrix with the number of individuals caught with each sized mesh (CatchPerNet_mat).

x0

A string of initial values for the parameters to be optimized over when applying the function optim. When rtype = "norm.loc", "norm.sca", or "lognorm", initial values may be ommitted (x0 = NULL), and starting vallues will be estimated using the earlier approach of Millar and Holst (1997).

rtype

A character string indicating which method for estimating selection curves should be used: "norm.loc" for a normal curve with common spread, "norm.sca" for a normal curve with variable spread, "lognorm" for a lognormal curve, "binorm.sca" for a bi-normal curve, "bilognorm" for a bi-lognormal curve, "tt.logistic" for a control and logistic curve, "gamma" for a gamma curve

rel.power

A string indicating the relative power of different meshSizes, must have same length as meshSizes (Default: rel.power = NULL).

plot

logical; should a plot be printed?

Details

Model adapted from the selectivity functions provided by Prof. Dr. Russell Millar (https://www.stat.auckland.ac.nz/~millar/). In the deviance plot open circles correspond to negative, closed to positive residuals. The size of the circles is proportional to the square of the residuals. To assess the model fit by the deviance plot it requires some experience, in general the pattern should be random and the sizes not too big. Please refer to Millar's publications and other publications for comparison. The model can produce errors if the starting values (x0) for the optim function are not realistic. Please be aware that if the method is changed the outcoming parameters can greatly vary. Simliarly the starting values have to be adapted when changing the method (rtype).

The parameters in par are on the internal scale of the model: mode and standard deviation for the first mesh size ("norm.loc", "norm.sca", "binorm.sca"), mean and standard deviation of the log length ("lognorm", "bilognorm"), intercept and slope of the logistic curve ("tt.logistic"), shape and scale per unit mesh size ("gamma"), and the logit of the proportions (p). This is also the scale of the starting values (x0). estimates contains the parameters on the usual scale (mode and standard deviation for the first mesh size, p; L50 and selection range for "tt.logistic") with their standard errors. Use predict.select_Millar to calculate the retention of the fitted model for any lengths and mesh sizes, and select_Millar_curve for the retention of given (e.g. published) parameters.

References

Millar, R. B., Holst, R., 1997. Estimation of gillnet and hook selectivity using log-linear models. ICES Journal of Marine Science: Journal du Conseil, 54(3):471-477

Holt, S. J. 1963. A method for determining gear selectivity and its application. ICNAF Special Publication, 5: 106-115.

Examples

data(haddock)

output <- select_Millar(haddock, x0 = c(-10,0.3,0),
   rtype = "tt.logistic")


plot(output, plotlens=seq(25,35,0.1), deviance_plot = FALSE)
legend("topleft",c("Control","Experimental"), lty=1:2, col=1:2)



# Gillnet
data(gillnet)

# Using inital estimates from old method
select_Millar(gillnet, x0 = NULL, rtype = "norm.loc")$value

#> [1] 11215.58
select_Millar(gillnet, x0 = NULL, rtype = "norm.sca")$value

#> [1] 11170.5
select_Millar(gillnet, x0 = NULL, rtype = "lognorm")$value

#> [1] 11136.26

# Two rtypes which require starting values
select_Millar(gillnet, x0 = c(55,4,65,4,3), rtype="binorm.sca")

#> $midLengths
#>  [1] 52.5 54.5 56.5 58.5 60.5 62.5 64.5 66.5 68.5 70.5 72.5
#> 
#> $meshSizes
#> [1] 13.5 14.0 14.8 15.4 15.9 16.6 17.8 19.0
#> 
#> $CatchPerNet_mat
#>       [,1] [,2] [,3] [,4] [,5] [,6] [,7] [,8]
#>  [1,]   52   11    1    1    0    0    0    0
#>  [2,]  102   91   16    4    4    2    0    3
#>  [3,]  295  232  131   61   17   13    3    1
#>  [4,]  309  318  362  243   95   26    4    3
#>  [5,]  118  173  326  342  199  100   10   11
#>  [6,]   79   87  191  239  202  201   39   15
#>  [7,]   27   48  111  143  133  185   72   25
#>  [8,]   14   17   44   51   52  122   74   41
#>  [9,]    8    6   14   23   25   59   65   76
#> [10,]    7    3    8   14   15   16   34   33
#> [11,]    0    3    1    2    5    4    6   15
#> 
#> $par
#> [1] 54.323571  3.278020 59.807472  7.325698  1.339119
#> 
#> $value
#> [1] 11059.37
#> 
#> $counts
#> function gradient 
#>      502       NA 
#> 
#> $convergence
#> [1] 1
#> 
#> $message
#> NULL
#> 
#> $hessian
#>           [,1]      [,2]       [,3]       [,4]       [,5]
#> [1,] 232.09347 -96.17580  17.035661 -28.867902 -58.486396
#> [2,] -96.17580 268.15653 -16.220889  32.726570 -92.556179
#> [3,]  17.03566 -16.22089   6.437706  -8.281554  -6.870236
#> [4,] -28.86790  32.72657  -8.281554  21.325272 -23.487064
#> [5,] -58.48640 -92.55618  -6.870236 -23.487064 180.188864
#> 
#> $deviance
#> function (object, ...) 
#> UseMethod("deviance")
#> <bytecode: 0x5881224a8eb0>
#> <environment: namespace:stats>
#> 
#> $rtype
#> [1] "binorm.sca"
#> 
#> $rel.power
#> [1] 1 1 1 1 1 1 1 1
#> 
#> $Dev.resids
#>             [,1]       [,2]       [,3]        [,4]       [,5]       [,6]
#>  [1,]  3.1524391 -2.3466445 -2.8108814 -1.19908010 -1.6416738 -1.1010611
#>  [2,]  1.5323430  1.8411524 -3.5119005 -3.34615667 -1.2431994 -0.4663512
#>  [3,]  6.0250577 -0.1818255 -2.6285411 -2.87575787 -4.6327295 -0.7873194
#>  [4,]  5.7767697 -0.5006038  0.4718943 -0.03571701 -4.4146653 -4.6688366
#>  [5,]  0.1401483 -1.7692146  0.3575580  2.55950825 -1.2248753 -0.4655460
#>  [6,]  2.0408252 -1.1059023 -1.0558681 -1.15469320 -2.3043584  4.1032852
#>  [7,] -1.2625374  0.1661943  1.1105286 -1.28690587 -3.9835553  2.3192825
#>  [8,] -0.4634281 -0.9222724  0.9902983 -2.04515979 -4.8349605  1.2862669
#>  [9,] -0.1760431 -1.9346301 -1.2131094 -1.58373365 -3.8948385 -1.8861554
#> [10,]  1.9475920 -0.8474169  0.1459995  0.88561742 -0.4550723 -2.8517991
#> [11,] -1.0836026  1.5880977 -0.6716172 -0.32846775  0.7868796 -0.9868420
#>             [,7]       [,8]
#>  [1,] -0.6387965 -0.3867040
#>  [2,] -1.2817899  2.8888162
#>  [3,] -0.4984114 -0.3683655
#>  [4,] -2.6675328 -0.4405384
#>  [5,] -2.7737420  1.9344458
#>  [6,]  0.4011796  2.0492829
#>  [7,]  2.4882952  3.3066163
#>  [8,]  2.3527446  5.7226968
#>  [9,]  0.6150381  9.4636139
#> [10,] -0.7273079  3.1092137
#> [11,] -1.9103282  2.0688158
#> 
#> $selection_ogive_mat
#>       Length       13.5         14      14.8       15.4       15.9       16.6
#>  [1,]   52.5 0.80501771 0.51391280 0.1706424 0.06745457 0.03342761 0.01503676
#>  [2,]   54.5 0.95091906 0.81204625 0.3750070 0.16168890 0.07653556 0.02978049
#>  [3,]   56.5 0.82314310 0.95085703 0.6618921 0.34950372 0.17752318 0.06499816
#>  [4,]   58.5 0.55628162 0.83345925 0.8999424 0.62075937 0.36894296 0.14671383
#>  [5,]   60.5 0.34100575 0.57766700 0.9355857 0.86894954 0.63462837 0.30658976
#>  [6,]   62.5 0.22940270 0.36030517 0.7593693 0.94862310 0.87210677 0.54675243
#>  [7,]   64.5 0.17553847 0.24119756 0.5132374 0.81816555 0.94906242 0.79899252
#>  [8,]   66.5 0.13760668 0.18361671 0.3286779 0.58356448 0.82753924 0.94317675
#>  [9,]   68.5 0.10277695 0.14568489 0.2300231 0.37994454 0.60188804 0.90231195
#> [10,]   70.5 0.07157392 0.11155077 0.1796182 0.25881336 0.39811903 0.71582689
#> [11,]   72.5 0.04628992 0.08023588 0.1442611 0.19720514 0.27127035 0.49757778
#>              17.8          19
#>  [1,] 0.005061236 0.001854765
#>  [2,] 0.008948484 0.003310710
#>  [3,] 0.015989289 0.005730395
#>  [4,] 0.030402075 0.009759185
#>  [5,] 0.062949174 0.016880027
#>  [6,] 0.134747375 0.030957894
#>  [7,] 0.272286992 0.061215201
#>  [8,] 0.483716104 0.125013155
#>  [9,] 0.726789403 0.244550345
#> [10,] 0.908696457 0.430594111
#> [11,] 0.943548869 0.658045517
#> 
#> $out
#>                     [,1]
#> null.l        22981.3847
#> model.l       25091.1229
#> full.l        25366.3699
#> Deviance        550.4941
#> Pearson.chisq   630.9630
#> d.o.f.           72.0000
#> 
#> $estimates
#>                         par       s.e.
#> Mode1(mesh1)     54.3235714 0.13798557
#> Std dev.1(mesh1)  3.2780203 0.13355660
#> Mode2(mesh1)     59.8074724 1.32748734
#> Std dev.2(mesh1)  7.3256977 0.79623248
#> P(mode1)          0.7923451 0.04245935
#> 
#> attr(,"class")
#> [1] "select_Millar"
select_Millar(gillnet, x0 = c(4,0.2,4.2,0.1,2), rtype="bilognorm")

#> $midLengths
#>  [1] 52.5 54.5 56.5 58.5 60.5 62.5 64.5 66.5 68.5 70.5 72.5
#> 
#> $meshSizes
#> [1] 13.5 14.0 14.8 15.4 15.9 16.6 17.8 19.0
#> 
#> $CatchPerNet_mat
#>       [,1] [,2] [,3] [,4] [,5] [,6] [,7] [,8]
#>  [1,]   52   11    1    1    0    0    0    0
#>  [2,]  102   91   16    4    4    2    0    3
#>  [3,]  295  232  131   61   17   13    3    1
#>  [4,]  309  318  362  243   95   26    4    3
#>  [5,]  118  173  326  342  199  100   10   11
#>  [6,]   79   87  191  239  202  201   39   15
#>  [7,]   27   48  111  143  133  185   72   25
#>  [8,]   14   17   44   51   52  122   74   41
#>  [9,]    8    6   14   23   25   59   65   76
#> [10,]    7    3    8   14   15   16   34   33
#> [11,]    0    3    1    2    5    4    6   15
#> 
#> $par
#> [1] 4.00209059 0.06584737 4.22748083 0.21500966 2.07648180
#> 
#> $value
#> [1] 11056.89
#> 
#> $counts
#> function gradient 
#>      501       NA 
#> 
#> $convergence
#> [1] 1
#> 
#> $message
#> NULL
#> 
#> $hessian
#>             [,1]        [,2]       [,3]        [,4]       [,5]
#> [1,]  737145.471 -329218.741  12996.069 -32666.0867 -1509.8741
#> [2,] -329218.741  959491.718 -27120.351  53309.5126 -5369.3038
#> [3,]   12996.069  -27120.351   3443.732  -7737.9054   301.6520
#> [4,]  -32666.087   53309.513  -7737.905  18374.2258  -725.4973
#> [5,]   -1509.874   -5369.304    301.652   -725.4973   107.4487
#> 
#> $deviance
#> function (object, ...) 
#> UseMethod("deviance")
#> <bytecode: 0x5881224a8eb0>
#> <environment: namespace:stats>
#> 
#> $rtype
#> [1] "bilognorm"
#> 
#> $rel.power
#> [1] 1 1 1 1 1 1 1 1
#> 
#> $Dev.resids
#>              [,1]        [,2]       [,3]        [,4]       [,5]       [,6]
#>  [1,]  3.13922335 -2.40264116 -2.7520509 -1.06277595 -1.5679475 -1.1380187
#>  [2,]  1.55475355  1.78752429 -3.5901916 -3.25611422 -1.0392261 -0.3489550
#>  [3,]  5.89305493 -0.05969053 -2.7291304 -2.94171205 -4.4780226 -0.4063065
#>  [4,]  5.29335178 -0.49697337  0.7121048 -0.06937979 -4.4293631 -4.3440000
#>  [5,]  0.04771127 -2.20246679  0.5498354  2.70834524 -1.2824867 -0.4449507
#>  [6,]  2.92963418 -1.36274530 -1.3519908 -1.10453466 -2.3162128  3.8987829
#>  [7,] -0.12382231  0.71365246  0.5904462 -1.53112449 -4.0214452  2.1714430
#>  [8,]  0.10839225 -0.05692893  0.8881013 -2.40216172 -4.9884024  1.2733941
#>  [9,] -0.34105940 -1.37383225 -0.7660284 -1.75473129 -4.1373155 -1.9030743
#> [10,]  1.17292401 -0.81587645  0.7334742  1.10577254 -0.5772759 -2.9482929
#> [11,] -1.56318443  1.25870578 -0.4413684 -0.04105247  0.8917710 -1.0614952
#>             [,7]       [,8]
#>  [1,] -0.7800155 -0.5364408
#>  [2,] -1.4388258  2.3756362
#>  [3,] -0.5889540 -0.8039055
#>  [4,] -2.4011562 -0.8112064
#>  [5,] -2.3393830  1.8608982
#>  [6,]  0.6644295  2.3087432
#>  [7,]  2.4217416  3.6681021
#>  [8,]  2.1852606  5.9283485
#>  [9,]  0.5489668  9.4854851
#> [10,] -0.6756282  3.0674271
#> [11,] -1.8618483  2.0710505
#> 
#> $selection_ogive_mat
#>       Length       13.5        14      14.8       15.4       15.9       16.6
#>  [1,]   52.5 0.82506960 0.5327307 0.1696513 0.06261988 0.03118562 0.01642821
#>  [2,]   54.5 0.96611266 0.8319239 0.3876150 0.16011951 0.07158238 0.02811931
#>  [3,]   56.5 0.85032272 0.9660310 0.6833954 0.36062239 0.17698821 0.06022595
#>  [4,]   58.5 0.59187502 0.8598659 0.9168711 0.64193936 0.38120570 0.14422724
#>  [5,]   60.5 0.35407865 0.6136509 0.9529089 0.88707225 0.65595410 0.31499839
#>  [6,]   62.5 0.20958206 0.3772698 0.7907281 0.96438700 0.89011485 0.56652779
#>  [7,]   64.5 0.14424868 0.2255093 0.5472609 0.84570893 0.96475853 0.81918618
#>  [8,]   66.5 0.12014460 0.1522825 0.3389986 0.61961430 0.85439259 0.95835970
#>  [9,]   68.5 0.11102025 0.1235701 0.2104182 0.40038574 0.63803374 0.92291611
#> [10,]   70.5 0.10535214 0.1127812 0.1481840 0.24920348 0.42137967 0.74938107
#> [11,]   72.5 0.09954579 0.1069611 0.1229119 0.16772919 0.26575488 0.53074296
#>              17.8          19
#>  [1,] 0.007717878 0.003650354
#>  [2,] 0.011482361 0.005666578
#>  [3,] 0.017166514 0.008429273
#>  [4,] 0.028636484 0.012183348
#>  [5,] 0.058240207 0.017855118
#>  [6,] 0.131587321 0.029100847
#>  [7,] 0.278378292 0.056568090
#>  [8,] 0.501475932 0.121356278
#>  [9,] 0.748131310 0.248701381
#> [10,] 0.925264231 0.446090728
#> [11,] 0.959976314 0.679532476
#> 
#> $out
#>                     [,1]
#> null.l        22981.3847
#> model.l       25093.6023
#> full.l        25366.3699
#> Deviance        545.5352
#> Pearson.chisq   619.2356
#> d.o.f.           72.0000
#> 
#> $estimates
#>                         par       s.e.
#> Mode1(mesh1)     54.4756989 0.08838970
#> Std dev.1(mesh1)  3.6144047 0.10520153
#> Mode2(mesh1)     65.4477215 4.85438585
#> Std dev.2(mesh1) 15.2583192 4.46442782
#> P(mode1)          0.8885962 0.01697675
#> 
#> attr(,"class")
#> [1] "select_Millar"

# Calculation with finer length resolution
output <- select_Millar(gillnet, x0 = NULL, rtype = "lognorm")

plot(output, plotlens=seq(40,90,0.1))


# Use alternate plot settings
output <- select_Millar(gillnet, x0 = NULL, rtype = "lognorm")

ncolor <- length(output$meshSizes)
plot(output, plotlens=seq(40,90,0.1), deviance_plot = FALSE,
 lty=1, col=rainbow(ncolor))
legend("topleft", col=rainbow(ncolor), legend=output$meshSizes,
 lty=1, title="Mesh size [cm]")


 # deviance plot only
 plot(output, plotlens=seq(40,90,0.1), selectivity_plot = FALSE)



# Stacked trammel net
# The data come from two experiments using different mesh sizes
# This analysis assumes common retention curve in both experiments.
# Note that summary function does not produce residual plot
# since lengths are not unique
data(trammelnet)

output <- select_Millar(trammelnet, x0 = c(25,4),
   rtype="norm.loc", rel.power = rep(1,6))


plot(output,plotlens=seq(10,40,0.1))